Browse Models
580 models found
Rose (2) for Unicorn Pen Plotter
Thingiverse Import
My second rose for my unicorn.P.S. go favorite and five star the inkscape to g-code extension NOW!thingiverse.com/thing:5986That thing is awesome. --- Imported from Thingiverse: https://www.thingiverse.com/thing:6157 Original creator: merlinjim
00PD
flower
rose
unicorn
Parl
Thingiverse Import
Parl --- Imported from Thingiverse: https://www.thingiverse.com/thing:10975 Original creator: Afro-Punk
00PD
bust
head
Printable Bus Pirate v2go Case
Thingiverse Import
Based on the laser cut Bus Pirate case. Seeing as I didn't have a laser cutter but did have a Makerbot I decided to print one instead. --- Imported from Thingiverse: https://www.thingiverse.com/thing:2135 Original creator: Gatsu
00PD
blender
Screw Thread Module: Extrude-Transform Polygons
Thingiverse Import
freakinhuge suggested that a module to generate screw threads would be a nice-to-have. This is a variation on my previous polygon extrude/transform module in which the triangle is in the X-Z plane rather than the X-Y plane.It allows you to generate screw threads that follow any set of equations you care to provide them.Again, because it generates the triangles directly via the polyhedron command, it's fast and lightweight.PS: the grayscale image is an anaglyph, look at it with red/blue glasses. --- Imported from Thingiverse: https://www.thingiverse.com/thing:8750 Original creator: syvwlch
00PD
Christmas Tree - Filled
Thingiverse Import
I like this design, but I wanted a filled in version for another project I'm working on. --- Imported from Thingiverse: https://www.thingiverse.com/thing:14629 Original creator: polymaker
00PD
2d
iPad2 BombProof Case
Thingiverse Import
This is a case that is designed to make an iPad2 drop proof. The iPad2 is being used to teach a young autistic person communication skills. The idea is that the two halves "slide" together and lock in place with the dovetail. This is rev 1 and has been dropped already. The case suffered the brunt of the impact and cracked as was intended. Rev 2 will include features to improve gripping ability. --- Imported from Thingiverse: https://www.thingiverse.com/thing:13635 Original creator: dj_werd
00PD
Tamiya Long Nose Pliers Non-Scratch replacement
Thingiverse Import
Replacement grips for Tamiya long nose pliers. --- Imported from Thingiverse: https://www.thingiverse.com/thing:16873 Original creator: capitaenz
00PD
pliers
Screwdriver holder
Thingiverse Import
Screwdriver holder which is designed to fit a tool holding wall (square holes) --- Imported from Thingiverse: https://www.thingiverse.com/thing:56642 Original creator: Crazyguy
00PD
holder
2nd stellation of the dodecahedron
Thingiverse Import
This is the second stellation of the dodecahedron. Instructions are embedded in the .dxf file. Structurally, this stellation is not as solid as the first stellation, but it's still reasonably sturdy. --- Imported from Thingiverse: https://www.thingiverse.com/thing:31 Original creator: phooky
00PD
geometry
MakerBot Board Covers
Thingiverse Import
A set of snap-on covers for the MakerBot's stepper motor printed circuit boards and its motherboard.I have included the SolidWorks part files and the STL files. --- Imported from Thingiverse: https://www.thingiverse.com/thing:3591 Original creator: WRIGHTMEDIA
00PD
board
EC Fan Mount
Thingiverse Import
The Extruder controller on my MakerBot has been erratic lately by shutting down during prints. I read on the MakerBot wiki (http://wiki.makerbot.com/cchb1) for the Heated Build Platform, that getting air flowing over the Extruder controller pcb will almost always keep it from shutting down.I designed a low profile enclosure that mounts a 40mm by 40mm 12VDC sleeve bearing fan at the side of the Extruder pcb. This side mount design provides reasonable air flow over the board while maintaining access to the reset button and terminals which are not easily accessible with a top mount design.I have uploaded the STL, G-code and SolidWorks assembly (.zip) files. With the uploaded G-code files, the total build time is approximately 47mins (24 mins for the funnel and 23mins for the fcover). --- Imported from Thingiverse: https://www.thingiverse.com/thing:3346 Original creator: WRIGHTMEDIA
00
Paper Clip
Thingiverse Import
Nothing new, but just something I made last night.Make as many as you want! --- Imported from Thingiverse: https://www.thingiverse.com/thing:1113 Original creator: PrintTo3D
00PD
office